Fedora preupgrade with a tiny /boot partition

This post is for people with, well, mature, installations of Fedora. The installers of yesteryear defaulted to a very small 250MB /boot partition. That’s so small it really gets in the way of using Fedora’s preupgrade feature.

These are the tricks I use whenever I’m upgrading one of these mature installations.

Firstly you must remove every kernel except the one you are currently using to run your system. That should clear out enough space for preupgrade to get things ready for you.

Even with the kernels removed preupgrade stil won’t have enough space to store the stage2 installer image. That’s it can download it during the install. When preupgrade completes you can reboot, select “Upgrade” via grub (if it is not selected by default) and try to do the upgrade.

Round about now you will discover the second problem. Even with a wired connection you can’t download the stage2 installer. Why not? Well, because preupgrade has incorrectly setup the kernel boot line causing the stage1 installer to try and download the image from the wrong place. You can fixup the kernel boot line using grub’s editing tools. Have a look for the parameter that tells the stage1 installer where to download stage2 and remove /LiveOS/squashfs.img from the end (stage1 automatically appends this).

With this obstacle knocked down you’ll encounter the third and final issuette. When anaconda scans the system to check there is enough disc space to complete the install it can’t find enough space in /boot. Now, by far the biggest thing inĀ  /boot right now is the stage1 installer image which has already been copied to RAM. In otherwords if you can delete it from /boot before anaconda checks there’s enough space then the upgrade process will finally work! If you have an encrypted root filesystem this is no problem because you have to enter a password before the space check. If you don’t have any encrypted partitions then you’ll have to be the worlds fastest typist to beat the space check. Good luck!

These are the commands needed to delete the preupgrade stage1 installer:

mount LABEL=/boot /boot
rm /boot/upgrade/initrd.img
 rm /boot/upgrade/vmlinuz
 umount /boot
 rmdir /boot

Note that you may have to tailor the initial mount command if your /boot partition is not labeled /boot.

Finally don’t worry about the wanton destruction of the stage1 files. As I say they are already loaded into RAM and if for some reason the upgrade still don’t work and you need to reload them a try again then you can just re-run preupgrade.

Have fun…

Share